| STAND ALONE DATA ACQUISITION MODULE: PC 10 + DATA MANAGEMENT SOFTWARE: VISULOG |
| |
21 CFR Part 11 compliant |
| 10 to 30 universal INPUT channels |
| Monitoring of physical values: temperature, pressure, humidity... |
| Qualification and characterization of equipement |
| |
|
| PC10 is a stand alone module for Modbus, Ethernet, TCP/IP networks. It measures and stores digital and analog signals issued from electrical and physical sensors. An automatic process sends an email on alarm events. |
| |
| Functionalities |
PC 10 |
| Acquisition, monitoring and data storage |
Temperature: thermocouples and RTDs
Process signals
Resistance up to 300 KΩ
Voltage up to 100 V |
| High accuracy |
0.01% RDG |
| 0.3 % RDG (voltage) |
| Channels |
10 to 30 universal INPUT channels
2 relay outputs |
| Measurement mode |
Multiplexer |
| Sampling |
Up to 250 samples / s |
| Internal memory |
100.000 values maximum |
|
| Network interfaces |
Modbus, Ethernet, TCP/IP... |
| Power supply |
9 / 48 V |
| Communication modes |
Ethernet, RS 485 and RS 232 |
| Additional functions |
E-mail alarms |
|
|
|
|
| |
 |
| |
| Size: |
330 x 145 x 38 mm |
| Weight: |
850 g |
| Operating conditions: |
-10 / 50 °C, 10 / 80 % RH |
|
| |
| VISULOG software |
| Data acquisition |
| Real time control and monitoring of data |
21 CFR Part 11 |
| Full traceability: 3 levels of rights, alarm validation, audit trail... |
| Sensor calibration, mapping of autoclaves |
| Advanced calculation possibilities (more than 5000 channels available) |
|
|
 |
| |
|
PC 10 data sheet