PJ 6301 tester calibrator is a high accurate instrument of measurement and simulation of physical and electrical values: DC voltage and current, resistance and temperature from thermocouples and RTDs.
Its graphical dual display enables INPUT and OUTPUT values to be simultaneously displayed and leads to keyboard simplification. On-line help messages are available at any time in case additional information on displayed options is needed.
Numerous further functions open a wide range of applications: data processing, customized signal linearisation, recorder analog OUTPUT, transmitter function, ramp and step function, relative measurement...
PJ 6301 is presented in a compact benchtop housing for on site use as well as panel mounted use. It is fully programmable via RS 232 and IEEE 488 interface, which makes it the perfect instrument for test benches and automatic test equipment applications. |
| |
| Main applications |
Due to outstanding performance and quality, PJ 6301 can achieve many exacting requirements. Applications may be separated into 3 groups:
- Accurate measurement for calibration of signal generators such as sensors, voltage and current sources, resistance, and for process control instruments, checking
- Temperature simulation, voltage and curretn sourcing resistance simulation for calibration of measuring equipment such as chart recorders, logical controllers, PLC analog inputs
- Test of signal conditioners and transmitters, using PJ 6301 simultaneous sensor simulation, and output signal measurement capability
|
|
|
|
| |
 |
| |
| Bench unit with rack and panel mount adapters |
| Size: |
225 x 88 x 310 mm |
| Weight: |
2 / 3 Kg according to hardware configuration |
| Operating conditions: |
0 / 50 °C, 20 / 75 % RH |
|
| |
| Functionalities |
PJ 6301 |
| Quantity measured |
Temperature: Thermocouples and RTDs
Process signals
Resistance |
| High accuracy |
0.005% RDG IN and OUT |
|
| Large backlight dual display |
CURRENT, MIN and MAX value |
| Communication |
RS 232 and
IEEE 488-2 |
| Power supply |
Mains + optional battery with internal charger |
| Additional functions |
Scaling
Ramp, step and manual step generation |
|
| |
PJ 6301 data sheet